PD1500A System Hardware Configuration, Calibration, and DPT Tests

Hardware Setup (Hardware Configuration)

Fixture Tab

Oscilloscope Tab

Calibration Tab

Oscilloscope Probe Setup

System Calibration and Compensation

Optional ±28 V Gate Drive Module Calibration

Run the Standard DPT Tests

Run the Clamp DPT Tests

Run the Reverse Recovery DPT Tests

Update the PD1500A Test Fixture Firmware

Additional PD1500A DPT Information

General Purpose ±28V Gate Drive Modules

Selecting/Installing Gate Drive Resistors on the -66848 and - 66849 Modules

28V Gate Drive Module Calibration

EEPROM Values

External Inductor

PD1500A Double-Pulse Test DUT Parameter Fields

PD15xxA Double-Pulse Test Output File Structure

Using the (Optional) Device (DUT) Heaters

Using the Talenia Electronics High-Side Device Heater

PD1500A Documentation